Description
Designed for any type of installation, the DSPRO station can be secured to the wall, mounted on a fixed frame or on a frame with wheels. Elegant and innovative, DSPRO stands out for its elegant design and attention to detail; the doors (optional) used to close the front compartment when not used, perfectly match the station streamlined design and amaze due to the graceful electromechanical closing system and space-saving opening mechanism. Air flows for hot and cold cycles are activated upon connection between the shuttle and the station, whose two front compartments are fully made of stainless steel (CNS), while the frame is made of anodised aluminium. Special gaskets guarantee the air sealing between the two compartments and the shuttle. A clear, simple, modern and intuitive interface meets any cycle or planning control need. Access to different and password-protected menus guarantees high levels of safety.
Application
Station for hot and cold food regeneration/maintenance on personalised trays, to be used in combination with a PROSERV shuttle.
Exterior
Control panel: made of thermoformed ABS, extremely resistant to impacts.
Body: aluminium coated with very thick anodic oxidation resistant to impacts and easy to clean.
Shuttle hooking system: motorised, with shuttle dragging toward the station without effort for the operator.
Wall mount (standard): wall mount by stainless steel (CNS) clamps and anti vibration elements.
Assembly on wheels (optional): optional assembly on a frame equipped with wheels to permit occasional movement.
Interior
Chambers and ventilation carter: stainless steel with large bending rays and flush surfaces joints to facilitate cleaning.
Technical compartment: lined in soundproof material to reduce noise emission to a minimum. Internal component disposition designed to facilitate maintenance operations.
Doors
They are made of impact resistant HPL with ergonomic stainless handles coated with anodic oxidation.
They make the live station parts inaccessible when the shuttle is not connected, in order to avoid risks for the consumer and damages to the device.
They are equipped with a gas spring system that facilitates the rotation and the electronic closure protected by a password.
Materials
AISI304 stainless steel, aluminium, synthetic material.
The Shuttle
Equipped with an efficient built-in insulation system with athermal profiles positioned around the chamber perimeter, PROSERV guarantees correct temperature maintaining during the transport and handling phases. Tray insertion is facilitated by the special gaskets on the wall that guarantee perfect separation between the hot and cold zones. The upper cover, equipped with a built-in barrier, offers an ample support surface able to transport up to 20 kg loads. The hygienic design, characterised by smoothed angles and flush AISI304 stainless steel surfaces, facilitates cleaning operations.
Application
Neutral trolley for hot and cold meal distribution on personalized trays, to be used in combination with a DSPRO station.
Exterior
Top cover: thermoformed ABS and aluminium, with integrated barrier.
Body: aluminium coated with very thick anodic oxidation and panels in HPL resistant to impacts and easy to clean.
Pushing handles: ergonomic and located in a position protected from impacts for safe and easy handling.
Doors: standard set-up with 4 doors with 270° opening.
optional set-up with 4 doors with 255° and 270° opening for washing in box.
Perimeter bumpers made of high-density polyethylene.
Interior
Chamber: stainless steel with large bending rays and flush surfaces joints to facilitate cleaning.
Ventilation carter and trays supports: stainless steel easy to remove and washable.
Partition wall: steel and synthetic material, completely washable in washing tunnel as well, with gaskets that can be replaced directly by the operator without using tools or removing the wall.
Doors
They are composed of an aluminium backdrop, a HPL external panel, a central panel of insulating material and one external in stainless steel (CNS).
Silicon gaskets easy to be removed.
Made up of an aluminium frame, external aluminium panel, a central insulation panel and internal stainless steel panel.
Optional locking.
Materials
AISI304 stainless steel, aluminium, synthetic material.
Download PDF
Reviews
There are no reviews yet.